Transparent Bisphenol A Epoxy Resin 828 128 E-44 CAS 61788-97-4

Transparent Bisphenol A Epoxy Resin 828 128 E-44 CAS 61788-97-4
Features Gallery Product Description Request A Quote
CAS No.: 61788-97-4
Mixing Ratio: 3:1
Cure Condition: 25 Degree
Appearance: Crystal Clear Colorless
Work Time: 30-45mins
MF: Resin Hardener
Viscosity: 500-1000cps(adjustable)
Shelf Life: 12monthes
Curing Time: 24hrs
Temperature Resistant: -60-120
Brand Name: Aorun
Packing: Accept OEM
High Light:

Bisphenol A Epoxy Resin 828


Epoxy Resin 828 CAS 61788-97-4


e44 epoxy resin CAS 61788-97-4

Basic Infomation
Place of Origin: China
Brand Name: Aorun
Model Number: ker 128
Payment & Shipping Terms
Packaging Details: drums
Delivery Time: 5-8 work days
Payment Terms: L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Supply Ability: 100000kg per month
Product Description

Crystal Clear Art Resin Coating 100% Solid Two Component Anti UV Epoxy Resin Casting for Bar Tops Tabletops Countertop


Quick Detail:



Name Art resin 2181 Application
coating wood table tops, wood veneers, countertops, artwork,
perspective packaging, photo frames, Epoxy, badges, high-grade resin and other electronic parts insulation, moisture-proof potting, confidential cover.
Type BPA Function Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless


1.Epoxy resin 2181 is a clear epoxy resin that cures under normal and low temperature conditions.
2.It has good leveling, natural defoaming, low viscosity, high hardness and high strength.
3.It can be cured at room temperature or by heating. Dedicated to crystal drop board, marble board, 3D floor insulation, metal floor, kitchen countertop, resin coating, high hardness coating on any surface; and other electronic parts, moisture-proof potting, secret masking, etc.
4.normal conditions can be reach a 5-7years anti yellow.
5.The maximum thickness of one potting can reach 5-7cm.
Items Units/conditions
Technical Data
Viscosity Shore-D 80-85
Volume resistivity 25℃/ Ω./ cm 4.3x1015
Surface resistivity 25℃/ Ω. 2.6x1014
Dielectric strength 25℃ KV/MM 25
Coefficient of linear expansion CM/K <6.1x10-5
Glass transition temperature >90
Temperature resistant -60~120


The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
1. If it is used to contact food after curing, the temperature of the food should not exceed 50 degrees Celsius.

2. When the hardness is higher than 82D (Shaw hardness), it can be directly polished.

3. The mixing quantity should not exceed 5kg, and the casting thickness should not exceed 3cm each layer.

4. When the temperature is higher than 25 degrees Celsius, it will cure faster, please reduce the number of mixing/casting by half, or it will be hardened in the container;

5.Curing time will be depend on room temperature and casting thickness , the room temperature higher it is, the faster curing it does. The thinner it cast the longer curing time it needs;

We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
Transparent Bisphenol A Epoxy Resin 828 128 E-44 CAS 61788-97-4 0
Recommended Products
Get in touch with us
Tel : 008618002155889
Characters Remaining(20/3000)