Aorun OEM Art Epoxy Resin Tabletop Sculpture Good Leveling Natural Foaming

Aorun OEM Art Epoxy Resin Tabletop Sculpture Good Leveling Natural Foaming
Features Gallery Product Description Request A Quote
Place Of Origin: Chongqing, China
Brand: Aorun
Mixing Ratio: 2:1
OEM: Avaliable
Advantage: Bubble Free And Self Leveling
Appearance: Transparent Colorless Liquid
Usage: Construction, Fiber & Garment, Footwear & Leather, Packing, Trans
Product Type: Resin Ab Glue Clearly
High Light:

OEM Art Epoxy Resin


Art Epoxy Resin Tabletop Sculpture


OEM Foam Epoxy Resin

Basic Infomation
Place of Origin: China
Brand Name: Aorun
Model Number: Aorun 007-X
Payment & Shipping Terms
Packaging Details: drums
Delivery Time: 5-8 work days
Payment Terms: L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Supply Ability: 100000kg per month
Product Description

Art Epoxy Resin Aorun 007-X For Tabletop Sculpture Immortal Flower Resin Frame Clear craft



Quick Detail:



Name Art resin 007-X Application
River table



Construction, Fiber & Garment, Footwear & Leather, Packing, Trans



Low odor,Low viscosity,High transparency,Long potlife



1. Epoxy resin 007-X is a transparent epoxy resin cured under normal and low temperature conditions.
2. Good leveling Natural foaming, low viscosity, high hardness and high strength.
3. It can be cured at room temperature or by heating. Used for crystal dropboard, marble slab, 3D floor insulation, metal flooring, kitchen countertops, resin coating. and high hardness coatings on all surfaces and other electronic components Adding moisture-proof material secret masking, etc.
4. Normal conditions can resist yellowing for 5-7 years.
5. The maximum thickness of a single pot can reach 5-7 cm.
Items Units/conditions
Technical Data
Viscosity Shore-D 80-85
Volume resistivity 25℃/ Ω./ cm 4.3x1015
Surface resistivity 25℃/ Ω. 2.6x1014
Dielectric strength 25℃ KV/MM 25
Coefficient of linear expansion CM/K <6.1x10-5
Glass transition temperature >90
Temperature resistant -60~120



The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
1. If it is used to contact food after curing, the temperature of the food should not exceed 50 degrees Celsius.

2. When the hardness is higher than 82D (Shaw hardness), it can be directly polished.

3. The mixing quantity should not exceed 5kg, and the casting thickness should not exceed 3cm each layer.

4. When the temperature is higher than 25 degrees Celsius, it will cure faster, please reduce the number of mixing/casting by half, or it will be hardened in the container;

5.Curing time will be depend on room temperature and casting thickness , the room temperature higher it is, the faster curing it does. The thinner it cast the longer curing time it needs;



Aorun OEM Art Epoxy Resin Tabletop Sculpture Good Leveling Natural Foaming 0





Q: Are you trading company or manufacturer?
A: We have our own Equipment and Glue factories.

Q: Do you provide production testing?
A: We provide samples for your own testing, tests done by us are also available. We will be glad that you try our samples before
you buy in large quantities. After using the sample, if it does not meet your needs, please discuss with us. We can adjust the
proportion or nature of the glue for you to achieve the product that best meets your needs.
Please contact us for more information.
Q: Why choose us?
A: We have done many OEMs, enable us to suggest you the best solution.

Q: What is the curing time?
A: The cured time of the gel depends on different situation, ex: the depth of the mold, the color of the gel or the light source.

Q: How to keep the Epoxy resin?
A: The shelf life of the product is 12 months; keep away from direct sunlight exposure and always keep the cap sealed.

Q: Is the Epoxy Resin safe to use?
A: Yes, our Epoxy Resin has certification in SDS, TDS, Food Safe, Heavy Metal, Plasticizer and Skin Irritation Tests.



We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
Aorun OEM Art Epoxy Resin Tabletop Sculpture Good Leveling Natural Foaming 1
Recommended Products
Get in touch with us
Tel : 008618002155889
Characters Remaining(20/3000)