Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel

Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel
Features Gallery Product Description Request A Quote
Product Name: Carbon Ceramic Brake Disk
Car Fitment: Toyota Car
Type: For Brake System Brake Disc
Year: 2000-2001, 2012-2013, 2010
Car Model: For CAR
Advantage: Economic
Application: For Brake Disc Used
Position: Front Rear Alxe
High Light:

Anti Corrosion Acrylic Paint


Color Coating Anti Corrosion Paint


Waterproof Anti Corrosion Paint

Basic Infomation
Place of Origin: China
Brand Name: Aorun
Model Number: Aorun
Payment & Shipping Terms
Packaging Details: drum
Delivery Time: 5-8 work days
Payment Terms: L/C, D/A, D/P, T/T,
Supply Ability: 100000kg per month
Product Description


Anti Corrosion Acrylic Paint 1k Metallic Color Coating Waterproof Paint



Quick Detail:



Name  Art resin 9422 Usage
Appliance Paint, antirust paint
Type  BPA Function Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless

A two-component coating composed of epoxy resin, asphalt, anti-rust pigment and curing agent.

Excellent water resistance and rust resistance,good chemical resistance and oil resistance; and the paint film is tough, with good adhesion, impact resistance and abrasion resistance, high effective ingredients, thicker coating can be applied at one time, airless spraying-dry film thickness can reach 150-200µm.

The paint film is tough and water-resistant. It has excellent adhesion, salt-resistant and anti-corrosion property and can resist chemicals Corrosion.


Storage notice:

Storage: this product should be stored in shady, dry, and ventilated warehouse and storage temperature 5-40℃ is appropriate. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

1. Beautiful and shiny paint film;
2. Fast drying in normal temperature;
3. Good Weather Resistant and Color Retention
4. Excellent leveling property & Easy Application

Technical Data
Volume resistivity
25℃/ Ω./ cm
Surface resistivity
25℃/ Ω.
Dielectric strength
25℃ KV/MM
Coefficient of linear expansion
Glass transition temperature
Temperature resistant


The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel 0
Operative method and tips:



         1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately                     weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
         2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please                      pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal                        the lid,to avoid the product due to moisture absorption scrapped.
         3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a                             whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to                     use the heating and curing.
         4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.

1.The primer film must be ground, cleaned and dried before spraying.(Wet abrading600#-800# , Dry abrading400#-600#)
2.When the temperature is higher than 30°C, the appropriate amount of Butyl Cellosolve should be added when the thinner is used to avoid floating with the silver powder paint.
3.Due to the high transparency of the metal paint, the requirements for the spraying tool and technology are high. Otherwise, the metal paint layer will have floating and weakly metallic feeling.
4.Metal paint spray film thickness should not exceed 25um. Otherwise the adhesion between layers may not be strong.
5.Flash after every layer of metal paint is sprayed. If there are dust spots or particles on the surface of the paint, wipe it off with a tack cloth.
6.Spray varnish asap after spraying 1K-based paint for 10-15 minutes. If the time is too long, it will affect the adhesion.






Are you a manufacturer?
A: Yes.
What is your main production?
A:Our main paint production is included various type Floor PaintFireproof PaintIndustria
Anti-corrosion Paint
What is your payment terms?
A: ByT/T.30%for depositand70%beforeshipment
ByLC100% irrevocable LC opened within two weeks aftercontract signed
What is your delivery?
A:30~45working daysafter depositandproduction specificationsconfirmed
Do you accept small order?
A:Due to paint is chemical goods it can't do bulk shipping We use 20and 40'containerfor the transportation
Can you provide the samples?
A:Yes we provides free sample less than 5kg,you only need to payfor the transportation cost
Can you produce the productaccording to customersrequirements? A:Yes we have our own R&D teamtell us your request we can fulfill it
What's your MOQ(min order quantity)?
A:Our MOQ is 500Kg,and we accept mixed order
Can you do an OEM?
A:Yes.we can do the brand loao and different packaae size asyourrequirements


             We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

     Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel 1
Company Display:
Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel 2


Recommended Products
Get in touch with us
Tel : 008618002155889
Characters Remaining(20/3000)