Coating Epoxy Anti Corrosion Paint Polyester Building For Pools

9433 pool anticorrosive paint is used as topcoat or intermediate layer for steel objects and cement and concrete. It has excellent water resistance, ozone oxidation resistance and chemical penetration resistance, high adhesion and mechanical strength, both ideal corrosion resistance and Certainly decorative.

Designed use: It is used as topcoat or intermediate layer for steel objects and cement and concrete. It has excellent water and chemical resistance, high adhesion and mechanical strength, ideal anti-corrosion, and certain decoration. Fride F021 anti-corrosion paint for water tank is suitable for anti-corrosion of sewage tanks, steel pipes, various steel structures, storage tanks and containers in corrosive conditions . Dry film thickness: 150 microns is equivalent to 185-200 microns wet film thickness,

Construction parameters: dry film thickness up to 300 microns
Mixing ratio: A: B = 3: 1 (weight ratio)
Drying time: surface dry 2h hard dry 24h
Overcoating interval: minimum 24 hours, maximum 7 days

         

 

         1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately                     weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.

         2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please                      pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal                        the lid,to avoid the product due to moisture absorption scrapped.

         3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a                             whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to                     use the heating and curing.
         4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.

 

 

NOTE:

         

 

1. Cleanses main films, and dry, dry before spraying and dry. (Udo Abrodraping600 # -800 #, dry abrodrad400 # -600 #)
2. The temperatures are more than 30 ° 100, to be more sensitive to the correct size of button to be thinner and with silver powder paint.
3. Sprinkle tools, technology methods, technology methods, technology methods, technology has been expressed. Otherwise the metal paint layer will swim and have weak metal emotions.
4. Hours of time to buy users or more than 25. Otherwise the nearby card between paved layers is not strong.
5. The spraying after each layer will be sprayed after the metallic paint. If there are any dust spots or particles on the surface paint, clean it with a fixed cloth.
More than ASAP from ASAP on ASAP on ASAP for 6K-based paint. If the time is too long it will affect adhesive.

 

 

FAQ:

 

 

1.Can you provide samples?
Yes, sample is available.However, you need to afford the ship cost.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.Are your products eco-friendly non-toxicproducts?
Our products are water based eco-friendly products. They are VOC free, non-flammable, flexibility and non-toxic.
4.How do you make sure the high quality?
We have strict product quality control testing.We also have got the ISO9001 quality management system certificate .
5.What services can you supply?
We provide OEM service and one to one peofessional service.

 

 

Packaging:

 

 

             We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

     

 

 

Company Display: