High Build Epoxy Paint Strong Anti Corrosion Industrial Steel Coating

High Build Epoxy Paint Strong Anti Corrosion Industrial Steel Coating
Features Gallery Product Description Request A Quote
Product Name: Epoxy Primers
Adhesion: Excellent
Color: Various Color
Application: Industry, Trucks, Bridges Etc
Gloss: High Glossy
Feature: Wear Resistance/Strong Adhesion
Application Method: Brush,Spray,Roll
Usage: Boat Paint, Bridge, Boat,oil Equipment, Container
High Light:

High Build Epoxy Paint


Strong Anti Corrosion Epoxy Paint


Steel Coating Anti Corrosion Epoxy Paint

Basic Infomation
Place of Origin: China
Brand Name: Aorun
Model Number: Aorun 9457
Payment & Shipping Terms
Packaging Details: drum
Delivery Time: 5-8 work days
Payment Terms: L/C, D/A, D/P, T/T,
Supply Ability: 100000kg per month
Product Description


High Build Epoxy Paint Strong Anti-Corrosion Primers Industrial Steel Coating



Quick Detail:



Name  Art resin 9457 Usage
Boat Paint, bridge, boat,oil equipment, container
Type  BPA Function Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless

Excellent cathodic protection,anticorrosive,abrasion resistance property,thick coating property while construction,climate resistance,dry rapidly, less adust when torch cutting and welding, good compatibility with a wide range of upper coatings, high adhesion with steel surface.
Construction parameters: dry film thickness up to 300 microns
Mixing ratio: A: B = 3: 1 (weight ratio)
Drying time: surface dry 2h hard dry 24h
Overcoating interval: minimum 24 hours, maximum 7 days


Storage notice:

Storage: this product should be stored in shady, dry, and ventilated warehouse and storage temperature 5-40℃ is appropriate. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

The practiced surface should be clear, dry and free from oil, grease and other contaminants.
Bare steel: To get the best finish, the cleaning with abrasive blast should be conformed to SA 21/2, and the removing oil and grease with solvent should be conformed to SSPC-SP1.
Shopprimed steel: Clean, dry and undamaged approved shopprimer.
Stir well to the can bottom. Thinner should be only used in the case of exceptional circumstances (max. 5% by the weight).

Technical Data
Volume resistivity
25℃/ Ω./ cm
Surface resistivity
25℃/ Ω.
Dielectric strength
25℃ KV/MM
Coefficient of linear expansion
Glass transition temperature
Temperature resistant


The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
High Build Epoxy Paint Strong Anti Corrosion Industrial Steel Coating 0
Operative method and tips:



         1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately                     weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
         2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please                      pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal                        the lid,to avoid the product due to moisture absorption scrapped.
         3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a                             whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to                     use the heating and curing.
         4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.

1. Cleanses main films, and dry, dry before spraying and dry. (Udo Abrodraping600 # -800 #, dry abrodrad400 # -600 #)
2. The temperatures are more than 30 ° 100, to be more sensitive to the correct size of button to be thinner and with silver powder paint.
3. Sprinkle tools, technology methods, technology methods, technology methods, technology has been expressed. Otherwise the metal paint layer will swim and have weak metal emotions.
4. Hours of time to buy users or more than 25. Otherwise the nearby card between paved layers is not strong.
5. The spraying after each layer will be sprayed after the metallic paint. If there are any dust spots or particles on the surface paint, clean it with a fixed cloth.
More than ASAP from ASAP on ASAP on ASAP for 6K-based paint. If the time is too long it will affect adhesive.






A: Do you provide free samples?
B: Yes, you only pay the shipping charges.

A: Can you give me a preferential price?
B: We are factory,the price depend on order quantity.

A: What is your company's advantages?
B: We have 20 years experience with good after-sale service to produce high-quality paint. We have been recognized by consumers.

A: How can I get more knowledge about your factory or your paint?
B: You can browse our website(http://www.toppaint.cc) or visite our factory. It would be our pleasure to meet you here.

B: Click below to send me more questions and I will answer all your questions.
Please Click Here!! >>>>>>

             We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

     High Build Epoxy Paint Strong Anti Corrosion Industrial Steel Coating 1
Company Display:
High Build Epoxy Paint Strong Anti Corrosion Industrial Steel Coating 2


Recommended Products
Get in touch with us
Tel : 008618002155889
Characters Remaining(20/3000)