Metal Steel Coating Anti Corrosion Paint For Corrosion Resistance

Metal Steel Coating Anti Corrosion Paint For Corrosion Resistance
Features Gallery Product Description Request A Quote
Product Name: Anticorrosive Coating
Material: Epoxy Polyester Resin
Gloss: Custom Gloss
Application: Steel Protection
Effect: Eco-friendly
Feature: Resistance To Corrosion And High Resistance
Application Method: Brush Or Spray
Usage: Appliance Paint, Building Coating, Road Marking Paint
High Light:

Metal Anti Corrosion Paint


Steel Coating Anti Corrosion Paint


Custom Gloss Anti Corrosion Paint

Basic Infomation
Place of Origin: China
Brand Name: Aorun
Model Number: Aorun 9482
Payment & Shipping Terms
Packaging Details: drum
Delivery Time: 5-8 work days
Payment Terms: L/C, D/A, D/P, T/T,
Supply Ability: 100000kg per month
Product Description


Paint For Metal Steel Coating For Corrosion Resistance



Quick Detail:



Name  Art resin 9482 Usage
Appliance Paint, Building Coating, Road Marking Paint
Type  BPA Function Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless

9482 is a two-component epoxy solvent paint. It can be applied in the cold and moist environment, especially in the wet and humid areas. The coating is hard and wear-resistant. Large range of colors for choice and it is mainly used for the floor of light industrial workshop, warehouse, parking lot etc.
It is also an all-purpose primer for epoxy series paints and used as the undercoat or putty coat after used together with quartz sand or quartz powder.


Storage notice:

Storage: this product should be stored in shady, dry, and ventilated warehouse and storage temperature 5-40℃ is appropriate. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

- Single Component Paint
- Two types of variation: Gloss Finish and Matt Finish
- Interior and exterior usages such as metal and steel structures, high-rise buildings, and machinery
- Good weather resistance
- Long-Lasting
- Quick dry

Technical Data
Volume resistivity
25℃/ Ω./ cm
Surface resistivity
25℃/ Ω.
Dielectric strength
25℃ KV/MM
Coefficient of linear expansion
Glass transition temperature
Temperature resistant


The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Metal Steel Coating Anti Corrosion Paint For Corrosion Resistance 0
Operative method and tips:



         1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately                     weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
         2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please                      pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal                        the lid,to avoid the product due to moisture absorption scrapped.
         3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a                             whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to                     use the heating and curing.
         4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.

1. Beautiful, seamless, dustproof and easy to clean.
2. Have good bonding with the solid base, small shrinkage with
good abrasion resistance and durability.
3. Have good corrosion-resistance to the general chemicals.
4. Nice appearance, rapid construction and economy.
5. Applicable to the moderate load.






1.How can you prove that you are a paint manufacturer rather than a trading company?
We have many years of experience in production and export,welcome to visit our factory at any time.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.I need to make sure the quality and the color .
Our pleasure!We can offer the liquid Free sample for you to test and color chart.
4.If the product is not ideal, what can we do?
We have perfect after-sales service to help to complete the construction smoothly.
Even if there are any unexpected things in your order, we will assist to solve them.
5.What's your MOQ (min order quantity),production period and delivery time?
Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.
6.I want to put my Logo on the packing .
We can accept the OEM, waiting for your details requirement.

             We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

     Metal Steel Coating Anti Corrosion Paint For Corrosion Resistance 1
Company Display:
Metal Steel Coating Anti Corrosion Paint For Corrosion Resistance 2


Recommended Products
Get in touch with us
Tel : 008618002155889
Characters Remaining(20/3000)